Waterboss Water Softener – A Comprehensive Product Review

Waterboss Water Softener

WaterBoss makes whole-house water softeners that can adjust the hardness of water from any tap in your home. If your municipality or well supplies hard water, a WaterBoss water softener can make a transformative difference in the quality of drinking water, the condition of your family's skin and hair, the brightness of clothing, and the effectiveness and longevity of appliances such as coffee makers, dishwashers, and washing machines. Find out more about WaterBoss water softeners and specialized solutions for reducing iron levels or neutralizing acidity in well or city water.

What Is the WaterBoss Water Softener?

WaterBoss is a company based in Groveport, Ohio that has made water softening and filtration systems for more than 20 years. This brand's softeners regenerate more quickly and efficiently than conventional systems, using as little water and salt as possible. Choose from two 22,000 grain capacity water softeners designed for use with either well or city water. The 700 model softens water, reduces iron, and regenerates in about 17 minutes using only 12 gallons of water and 2.5 pounds of salt. The 950 model is designed for use with city water and will reduce the odor and smell of chlorine. The 900 model has a higher 36,400 grain capacity. The 950 and 900 models both regenerate in less than 20 minutes with 14 gallons of water and 2.5 pounds of salt. These demand-led models can be more efficient than timed water softeners made by other brands.

The 700 and 900 WaterBoss water softener models feature iron filters designed for use with well water, which tends to have significantly higher iron content than city water. These filtration mechanisms consist of a packed bed of fine mesh resin capable of reducing up to 10 parts per million of iron. This is up to twice as much iron reduction as other conventional water softeners with this feature. Iron filtration can help to reduce staining on clothing and surfaces in the home while significantly improving the taste and odor of well water. WaterBoss also makes a specialized 900IF model for well water with extremely high levels of iron and ferric or iron bacteria that is compatible with the 700 and 900 WaterBoss water softeners as well as conventional water softener units.

In addition to one or more parts per million of ferrous or clear water iron, well water may also contain dirt, sand, or sediment, as well as more than one grain per gallon of calcium and magnesium carbonate. The three-in-one filtration and softening design of WaterBoss units can remove dirt and sediment to 20 microns, iron up to 10 parts per million with standard filters or up to 15 parts per million with the 900IF iron filter, and soften water up to 90 grains per gallon. In addition to eliminating iron from well water, WaterBoss also produces the only retail-level softener unit that does double duty to provide whole-house chlorine reduction for customers relying on municipal water. If your water is acidic, you may also be interested in the WaterBoss Acid-Neutralizing Whole-House Water Filter to adjust pH levels.

WaterBoss water softeners and other types of water treatment units are easy to install and are more compact than conventional systems. This brand's softeners come with factory-installed bypass valves. The high performance of these units is made possible due to the fine mesh resin, which allows these systems to expend fewer resources and regenerate in less time. The standard mesh resin on conventional units requires more salt and water to support slower regeneration. WaterBoss water softeners and filters are made in the USA.

WATER BOSS 74011 Waterboss Water Softener
  • A quiet, highly efficient water softener with built-in iron and sediment filters

Every WaterBoss softener or filtration unit is tested at the factory, which boasts laser and induction welders and 10 injection molding machines for precision designs. The injection molding on this brand's systems is significantly more precise than the blow mold techniques used by many competitors. These water softening units contain self-cleaning dirt and sediment filters for continuous high-performance without the need to replace filter media. Every softener model also features an indicator light to make it clear when the regeneration process is underway.

The 700 model water softener is designed primarily for well water and has a lower capacity than the 900 or 950 models. The 700 and 900 models both provide iron filtration functions, while the 950 provides chlorine reduction. If your well has very high levels of iron and traces of ferrous or iron bacteria, you should also consider the 900IF model, which is a discrete iron filter that should be used with the 700 or 900 filter model for filtration and softening. These water softeners come with detailed instructions and a do-it-yourself DVD to make the installation process easier to complete without the need for expert assistance.

The WaterBoss 700 is a 22,000 grain whole-house model capable of softening up to 70 grains per gallon of water and reduces up to 10 parts per million of ferrous iron, filter dirt, and sediment. The 700 model supports a 16 gallon per minute water flow rate at 15 PSI to sustain pressure for showers and appliances. This model measures 25.75 inches high by 14.75 inches wide by 18.75 inches deep with a tank that is 22 inches long and 10 inches wide. WaterBoss recommends the 700 unit for more than 95% of hard water conditions, including most well water issues. This softener features a built-in self-cleaning filter that will never require a filter change. Regeneration occurs in only 18 minutes and requires 16 gallons of water and 2.5 pounds of salt.

The 900 WaterBoss model is a 35,400 grain water softener model that can soften up to 90 grains per gallon and reduce 10 parts per million of ferrous iron, as well as filter dirt and sediment. This model provides a slightly lower 10 gallon per minute water flow rate at 15 PSI and features a built-in self-cleaning filter that never requires a change. The 900 unit measures 30.75 inches high by 14.75 inches wide and 18.75 inches deep and has a tank that is 29 inches long and 10 inches wide. This higher-capacity model is also suitable for resolving most well water problems and takes 38 minutes to regenerate using 27 gallons of water and 6 pounds of salt.

The WaterBoss 950 is a 22,000 grain system is designed to be used with municipally-treated water rather than well water. This model features a mixed media bed that also functions as a chlorine filter. This model can remove up to 25 grains per gallon of hardness and reduce chlorine odor and taste to improve the quality of drinking and bathing water. The 950 unit provides eight gallon per minute water flow at 15 PSI. The built-in self-cleaning filter in this model also never needs to have a cartridge change. This model is suitable for use with city water with low iron levels. The 950 model takes between 17 to 19 minutes to regenerate with 14 gallons of water and only 2.5 pounds of salt. This model measures 30.75 inches high by 14.75 inches wide and 18.75 inches deep with a tank that is 29 inches long and 10 inches wide.

The WaterBoss 900IF is a dedicated iron water filter with a green sand media to provide the maximum ferrous iron reduction of 15 parts per million. This model is also capable of reducing iron bacteria and up to one part per million of hydrogen sulfide. This system relies on potassium permanganate to regenerate, which, in turn, produces manganese dioxide on the surface to immediately oxidize iron as it comes into contact with the media. The residual iron is cleansed away during a backwash cycle. This iron reduction filter measures 30.75 inches high by 14.75 inches wide and 18.75 inches deep. This filter can be used to enhance the iron filtration capabilities of conventional softeners made by other brands or WaterBoss 700 or 900 models.

If your water is acidic with a pH level as low as 6.5, you may want to install an acid filter prior to installing a water softener. This acid neutralizing filter can help to prevent stains from forming in fixtures and copper pipes. The filter provides eight gallons per minute of filtered water flow with a one-stage stand filter. This system uses backwash to eliminate residues filtered from water and is capable of handling feed water pressure from 30 psi up to 120 psi and temperatures from 40 up to 120 degrees Fahrenheit. The acid neutralizing filter measures 30.75 inches high by 14.75 inches wide and 18.75 inches deep. The whole-house WaterBoss Acid Neutralizing Filter relies on sand filtration and does not require salt to operate.

WaterBoss Water Softener Warranty

WaterBoss systems come with a 3 year limited parts warranty and 10 year limited material and workmanship warranty that can be activated by submitting the registration card included in the packaging within 30 days of installation. If the system experiences any electronic or mechanical failures due to materials or workmanship, the defective item can be repaired or replaced for three days from the date of original installation. Media is excluded from this warranty. If the brine cabinet, media tank, or valve body are found to be defective in either materials or workmanship, WaterBoss will replace these items for up to 10 years from the original installation.

Pricing

You can purchase WaterBoss water softeners from home improvement retailers or online marketplaces. The 700 model 22,000 grain capacity water softener with iron filtration is priced at $550.98. Purchase the higher capacity 36,400 grain capacity model 900 for $559.20. The 950 model with chlorine filtration capabilities designed for use with municipal water is priced at $649.99. Purchase the 900IF Iron Reduction Filter for use with the 700 or 900 model or conventional softeners for $382.28 from major home improvement stores. The brand's Acid Neutralizing Filter sells for $466. In general, pricing of WaterBoss models is set by the manufacturer. You may save money by seeking out vendor promotions.

How the WaterBoss Water Softener Compares

Iron Pro 48K Combination Water Softener & Iron Filter with Fleck...
  • Water softener, iron filter, all in one -- Ships Pre Loaded for easier installation !!!
  • 48, 000 Grain Capacity, fine mesh resin designed for high iron removal & long life
  • Fleck 5600Sxt digital metered valve for efficiency and ease of use, 5 year warranty

Price: 

 $650.00

Ease of Use:

Assembly Time:

Build Quality:

Warranty:

ABCwaters Built Fleck 5600sxt 48,000 Water Softener SPACE SAVER +...
  • WATER SOFTENER OVERVIEW - This is our Space Saver model. This is a complete water softener system that includes a pair...
  • INSTALLATION KIT - We add a special touch to our offerings. We provide an installation kit which is includes items that...
  • MINERAL & BRINE TANKS - Whole house system is built using 2 American made tanks. (1) Black 10” diameter mineral tank...

Price: 

 $699.99

Ease of Use:

Assembly Time:

Build Quality:

Warranty:

GE GXSH45V 45,100 Grain Water Softener
  • Easy to use up-front electronic controls with status light indicator
  • 45,100 Grain capacity
  • Maximum hardness removal (160 gpg)

Price: 

 $903.46

Ease of Use:

Assembly Time:

Build Quality:

Warranty:

Comparison Table

Product

Details

WATER BOSS 74011 Waterboss Water Softener

WaterBoss Water Softener Specifications

Price

Ease of Use:

-

Assembly Time:

-

Build Quality:

-

Warranty: 

-

Iron Pro 48K Combination Water Softener & Iron Filter with Fleck...

Fleck 48,000 Grain Capacity Digital SXT Metered Whole-House Water Softener

Price

Ease of Use:

Assembly Time:

Build Quality:

Warranty: 

ABCwaters Built Fleck 5600sxt 48,000 Water Softener SPACE SAVER +...

ABCwaters 48,000 Grain Capacity Water Softener

Price

Ease of Use:

Assembly Time:

Build Quality:

Warranty: 

GE GXSH45V 45,100 Grain Water Softener

GE 45,100 Grain Water Softener

Price

Ease of Use:

Assembly Time:

Build Quality:

Warranty: 

Pros

  • 22,000 to 35,400 grain systems for whole house water filtration
  • WaterBoss systems are faster and more efficient than conventional softeners
  • Choose from softener models with iron or chlorine filtration capabilities

Cons

  • All WaterBoss systems rely on some type of salt and no salt-free designs are available
  • Screws exposed to salt may corrode and cause leaks
  • List Element

Conclusion

Whether your water is sourced from a well or municipal supply, WaterBoss makes units capable of supplying softened water to every tap and water-based appliance in your home. Choose a highly efficient model with a sufficient number of grains for usage in your home. These systems are designed to regenerate much more quickly and use less water and salt in the process than conventional water softeners by other brands.

WaterBoss also makes specialized filtration solutions for eliminating excess iron or adjusting the pH of your water. You can compensate for practically any water quality issue by installing the appropriate WaterBoss softener and whole-house filtration system. Some individuals may have medical conditions that can be exacerbated by the salt or salt substitutes used to soften water. If this is the case and you need to rely on a substitute or salt-free system, WaterBoss appliances may not perform as efficiently as rated or may not be the right softener. Factor in your water source, usage, and preferences regarding water softening supplies to decide if a WaterBoss water softener is the right choice for your home.


LEAVE A REPLY

Please enter your comment!
Please enter your name here